Is the battery on my new Macbook Air not charging?
If the new Macbook Air battery not charging, the condition of the old one may be to blame. If you encounter this issue, do the following actions to fix it:
System management controller reset
Your Mac’s system management controller (SMC) can be easily reset to fix the battery issue. The logic board’s power management chip is in charge of that. Usually, restarting your Mac will restore it.
You might need to visit an Apple Store or use AppleCare if restarting the device is unable to reset it. Check out these three techniques if you’ve attempted a number of different options without success.
Several issues with your Mac can be resolved by resetting the SMC. Although a reboot may seem harsh, your data won’t be lost.
From the Apple menu, you may verify the T2 security chip. To verify that the battery is fully charged, choose “Battery” from the menu. Any more issues with the battery are resolved during this procedure.
Avoid over-resetting the SMC to avoid losing crucial settings like power saving mode.
examining your MacBook battery’s condition
Checking the battery connector is the first step in resolving a new laptop battery issue in Dubai. Remove and clean any residue if any is present.
The MacBook battery connector monitors battery health via SM-bus data channels and current-sensing circuitry. A new battery needs to be replaced when it has less than 50% of its original capacity.
The MacBook’s notification area will also provide information about the battery.
Check the MacBook battery information area of the device’s system settings to understand what the message’s precise meaning is.
Remove any heat-insulating items from the battery if this doesn’t work. This can result in a defective logic board.
Another option is to try reinstalling Mac OS X. This procedure ought should resolve the issue. Try to shut down the Mac from the Apple menu by hitting Control-Shift-Option, and then hold down the power button for five seconds if the issue still exists.
The MagSafe Power Connector Cleaning
Your new Macbook Air’s the MagSafe connector may not be charging if that’s the case; the adapter may be at fault. By gently removing the old adapter and the pins, you may completely clean it.
Contact Apple support and ask them to fix the adapter if this doesn’t fix the issue. If the issue still exists, you might want to swap out the adaptor. A soiled connector may possibly be the source of the issue.
- You must take out any debris that has gathered in the socket in order to clean the MagSafe connector.
- Your MacBook’s MagSafe connector may not charge properly if there is a little amount of dust.
- You will want an antistatic brush and a gentle towel to clean it. Use a non-metal object; metal objects can harm connectors.
- Before use the adapter after cleaning the connector, make sure it is totally dry.
After changing the battery, resetting the SMC
You might need to reset your Mac’s SMC if it has been locked since you placed a new battery. Shut off the computer and hold down the power button for at least 10 seconds to accomplish this.
You might need to conduct a hard reset if your Mac still won’t start after this. Only Macs without the Apple T2 security chip can use this procedure.
It’s not as simple as it sounds to reset the SMC. Before beginning this operation, you must remove the battery and power adaptor.
Any leftover electric energy in the SMC capacitors should be discharged by holding the power button for five seconds. The capacitors can now be fully discharged by the procedure by waiting a few minutes. Reinstall the battery after the operation. You could also attempt to reset the PRAM.
For more information about “Macbook repair in Dubai“, call our toll free number 045864033.